本文通过环氧树脂和丙烯酸为原料反应合成了环氧丙烯酸树脂(EA),然后用硅烷偶联剂3-甲基丙烯酰氧丙基三甲氧基硅烷(MPS)对其进行改性,得到可紫外光固化的有机硅耐磨透明涂层,并对涂层的各种性能进行了测试,如硬度测试、附着力测试和耐磨性能测试等.结果表明,相比未涂覆的有机玻璃基材,涂覆后的有机玻璃基材的表面硬度和透光率均有所增加,且随硅烷偶联剂含量的增加而有所提高.对耐磨涂层的热稳定性也进行了研究,结果发现,改性后的环氧丙烯酸树脂的热稳定性要明显好于未改性的.
参考文献
| [1] | L. Zajickova;V. Bursikova;J. Janca.Protection coatings for polycarbonates based on PECVD from organosilicon feeds[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,19981/2(1/2):19-21. |
| [2] | Kerstin Taeschner;Hagen Bartzsch;Peter Frach;Eberhard Schultheiss.Scratch resistant optical coatings on polymers by magnetron-plasma-enhanced chemical vapor deposition[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,201212(12):4150-4154. |
| [3] | Damasceno JC.;Camargo SS.;Cremona M..Deposition and evaluation of DLC-Si protective coatings for polycarbonate materials[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,20020(0):195-199. |
| [4] | R. -P. Winkler;E. Arpac;H. Schirra;S. Sepeur;I. Wegner;H. Schmidt.Aqueous wet coatings for transparent plastic glazing[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,19991/2(1/2):209-211. |
| [5] | M. A. Aegerter;R. Almeida;A. Soutar.Coatings made by sol-gel and chemical nanotechnology[J].Journal of Sol-Gel Science and Technology,20082(2):203-236. |
| [6] | Tulay Yllmaz Inan;EkermEkinci;Abdulkadir Kuyulu;Attila Gungor.Preparation of novel UV-curable methacrylated urethane resins from a modified epoxy resin and isocyanatoethylmethacrylate (IEM)[J].Polymer bulletin,20025(5):437-444. |
| [7] | Chiang CL.;Ma CCM.;Wang FY.;Kuan HC..Thermo-oxidative degradation of novel epoxy containing silicon and phosphorous nanocomposites[J].European Polymer Journal,20034(4):825-830. |
| [8] | Kim JW.;Suh KD..Amphiphilic urethane acrylate hydrogels having heterophasic gel structure: swelling behaviors and mechanical properties[J].Colloid and polymer science,19984(4):342-348. |
| [9] | 李玉亭;张尼尼;蔡弘华;李海洋;何祝丽;罗仲宽.有机硅改性环氧树脂的合成及其性能[J].材料科学与工程学报,2009(1):58-61. |
| [10] | 王慧敏;王炎;李林林;韩冬冰.环氧丙烯酸酯/蒙脱土纳米复合材料的合成及性能研究[J].材料科学与工程学报,2004(6):906-908. |
| [11] | 田志高;陈红艳.紫外光固化改性环氧丙烯酸酯涂料的研制[J].材料科学与工程学报,2004(1):95-97. |
| [12] | Seong Woo Kim.Characterization of UV curable hybrid hard coating materials prepared by sol-gel method[J].The Korean journal of chemical engineering,20111(1):298-303. |
| [13] | Karata S;Kizilkaya C;Kayaman-Apohan N;Gungor A.Preparation and characterization of sol-gel derived UV-curable organo-silica-titania hybrid coatings[J].Progress in Organic Coatings: An International Review Journal,20072(2):140-147. |
| [14] | Zhang L;Zeng ZH;Yang JW;Chen YL.Characterization and properties of UV-curable polyurethane-acrylate/silica hybrid materials prepared by the sol-gel process[J].Polymer international,200410(10):1431-1435. |
| [15] | 冯汉文;李建雄;付文;刘安华.硅氧烷改性环氧丙烯酸酯及其紫外-湿气双固化涂层的性能[J].涂料工业,2013(2):1-5. |
| [16] | Bayramoglu G;Kahraman MV;Kayaman-Apohan N;Gungor A.Synthesis and characterization of UV-curable dual hybrid oligomers based on epoxy acrylate containing pendant alkoxysilane groups[J].Progress in Organic Coatings: An International Review Journal,20061(1):50-55. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%